Programmable Logic Control

• 1.5 Cu. Ft. Twin Tank Water Softener With Auto Backwash
• 1.5 Cu. Ft. Carbon Filter With Auto Backwash
• 5 Micron Pre-Filter
• Stainless Steel Multi-Stage Pump
• TFC Membrane
• Fiberglass or stainless steel Membrane Housing
• Adjustable Waste/Recycle Needle Valves
• Product/Waste Flow Meters
• 1 Hp Stainless Steel Repressurization Pump With 10 Gallon Pressure Tank
• Two 20” Carbon Block Post-Filters
• Pre And Post-Filter Gauges
• System PSI Gauge
• Stainless Steel 24 GPM Ultraviolet Water Sterilizer
• Stainless Steel Pre-Treatment Jackets

Powder-Coated Steel Frame

• On/Off Switch
• Fused Power
• Time Delay
• UV Light Switch
• Repressurization Switch
• Dual Level Controller
• Automatic Flush
• TDS Meter
• System Control Switch
• Low Pressure Switch
• Low Pressure Off Delay
• Status Lights
• Hourly Flush
• Recycle Flow Meter
• Stainless Steel Needle Valves
• Pre-Treatment Lock-Out With Light
• Ozonation

PLC control to provide start/stop, sequential, and alarm control.

RO System start permissible conditions

1. Power On
2. Start button pushed
3. low pressure switch closed
4. permeate water tank level below low level
( low and high level switches are on open position)

Five conditions will cause the RO to shut down the machine:

1. high working pressure,
2. low inlet pressure (<20 psi)
3. starter overload trip
4. product water storage tank level high
5. emergency shut-down button pushed.